BEFORE/AFTER
VaPOR honing, and why it’s a good idea!
The advantage of Vapor honing is it produces a finer finish on a surface than traditional dry blasting. The water flushes out the abrasive, so there is no impregnation of the blasted surface. Any sediment or residual abrasive media is washed out. This leaves a cleaner surface.
Vapor blasting is preferred when you have a surface that you would like to preserve. it gives you the ability to clean, de-grease, and blast a surface in one step. This save considerable time over traditional dry abrasive blasting.
Additionally, you can use much finer abrasive media with wet blasting, as the water is a more effective conduit for fine mesh abrasives than compressed air.
we currently can handle most motorcycle and car engine parts as well as full size rims.
Durability & Longevity!
Vapor Honed components retain their appearance due to the peening and sealing nature of the finish. Particularly with aluminum, the pores of the metal are peened closed, which prevents future staining and corrosion. This ensures that your components will look attractive and stay clean for many years to come.
Preparing your parts for shipping:
We recommend disassembling all parts before shipping/dropping them off to avoid additional charges. Remove all valves, seals, and bearing if applicable. If shipping carburetors, we recommend you drain all fuel the best you can prior to shipping.
ADDITIONAL SERVICES:
We offer help with re-jetting and rebuilding motorcycle Carburetors of all makes and models.
REQUEST A QUOTE:
HOW THE PROCESS WORKS:
send us an email or call Mike @ (516)-717-5557 and leave a detailed message.
2. ship part or set up drop off time.
3. Invoice to be pay in full at completion of service.
(we accept all major credit cards, cash, or paypal)
